User manual

26
Chapter 6 DVR Control
This keyboard support control of embedded DVR via RS-485，and control of PC DVR via
Ethernet or RS-485。After starting, press【MODE】to switch from the control devices mode to
DVR mode.
6.1 User Log-in
【Fig 6-1 Log-in Menu of DVR Control】
Find setup of communication port、control protocol、baud rate in devices management in
keyboard parameter setting。PC_DVR means the controlled device is a PC DVR，EM_DVR means
embedded DVR。
As to user code and password, please refer to User Management and Password Management
in Keyboard Parameters Settings。The factory default setup: user 1as advanced administrator, and
password“000000”.
6.2 Embedded DVR
【Fig 6-2 Main menu of EM DVR Control】
Current Device：DVR
Communication Port：485
Control Protocol：PC_DVR
Baud Rate：9600
User Code：01
Password：