User manual

23
press【PROG】to save settings and exit to splicing control window.
【Picture 4-10 screen splicing unit relations window】
4、 In splicing control window,【F1】～【F7】are customized buttons.（customized in
specifications and button setting window, each includes 5 splicing units）【F8】is quick
button for full-screen.【F9】is reset button.【F10】is a quick button for specifications and
button setting window.
【Picture 4-11 screen splicing unit relations window】
Main functions and instructions in splicing control window：
1、 Monitor and camera switching：Same as in matrix control window. It supports number
inputs,【PREV】button and【NEXT】button, and shuttle.
2、 PTZ control：User can control the PTZ movement of speed dome cameras or PTZ
receivers when cursor falls on the area of camera numbers.
3、 Large screen splicing：There are two methods, either through splicing buttons or
joystick（cursor must fall on the area of monitor numbers, otherwise, the movement of
joystick will lead to PTZ control）. It supports maximum 11 splicing units. If user wants
to add more, he must press【F9】to reset first.
4、 Splicing settings：Press【F10】to enter specifications and button setting window, press
【PROG】to enter screen splicing unit relations window.
5、 Joystick operations：Joystick has two main functions: PTZ control and splicing control.
If user needs to make PTZ control, he must press【CAM】to move cursor to the area of
camera numbers. If user needs to make splicing control, he must press【MON】to move
cursor to the area of monitor numbers.
Monitor number：21
Matrix output：00002
Please confirm the relations