User manual

22
【picture 4-8 settings for screen wall specifications and splicing buttons】
b) Press【F9】“ set splicing buttons” to edit splicing buttons as follows.
Move joystick to choose the start position of the splicing unit, and press【LOCK】
to confirm. Then choose the end position and confirm. Now, the lines between screens
disappear, which means a splicing unit is completed. Video in the original starting
screen is retained and expanded into the splicing unit.
User can set 4 more splicing units by repeating the above procedures. After the
completion of the setting, press any button between【F1】 and【F7】, this button is
customized. a figure reflecting the corresponding splicing unit will be shown beside
each button. In this way, one splicing button can automate complex splicing settings.
Each button includes maximum 5 groups, as shown by the following picture.
【Picture 4-9 specifications and button setting window】
c) Press【F10】to save settings for specifications and splicing buttons and exit to
splicing control window.
3、 Press【PROG】to enter unit relations window. User can set the relations between video
outputs of matrix with monitors, according to the practical connections. For example,
monitor number 11 relates to the first channel of matrix output, while monitor number
21 relates to the second channel of matrix outputs„„. After the completion of settings,