User manual

21
【Picture 4-7 Switch to other matrixes】
4.12 OSD Setting
If user is senior admin, he could enter OSD Setting by pressing【SHIFT】+【PROG】 and
entering user ID and password. One matrix allows only one user to enter OSD setting
simultaneously. If another user has already entered OSD Setting mode, or the current user‟s
authority is high enough, there will be hints on the keyboard screen. OSD menu is conducted
mainly through number buttons,【ESC】、【ENTER】, joystick and shuttle. Please refer to OSD
Setting Instruction manual for details.
4.13 Large Screen Splicing
Large screen splicing requires matrix, keyboard and splicing controller. Connect the video
output of matrix to the input port of splicing controller. Connect the RS-485 port on keyboard to
the port on splicing controller. Press【MULTI】on keyboard to enter splicing control window. Also
user can go back to matrix control window by pressing【MULTI】again. Keyboard support any
combination of screen wall within the range of 8×6 and 2×2, and 7 groups of self-customized
splicing buttons. User can edit the specification of screen wall and function of splicing buttons.
User can also control cameras and splice screens in splicing control window.
Operation Procedures：
1、 Press【MULTI】to enter splicing control window.
2、 Press【F10】“ splicing settings” to enter settings for screen wall specifications and
splicing buttons.
a) Press【F8】“ edit specifications” to edit the screen specification of splicing unit as
follows. Input numbers in corresponding places, minimum 2×2，maximum 8×6.
2008-08-12 13:45:26
matrix1 IP: 010.010.010.050
matrix2 IP: 010.010.010.051
matrix3 IP: 010.010.010.052
matrix4 IP: 010.010.010.053
matrix5 IP: 010.010.010.054
matrix6 IP: 010.010.010.055
matrix7 IP: 010.010.010.056
matrix8 IP: 010.010.010.057
Input NO.1-8 to choose corresponding matrix