User manual

18
5、 Macro setting table：Press and then to enter macro setting table. Firstly,
input macro number to enter the following window：
【Picture 4-4 Macro setting table】
a) Press【1】： edit macro name, press【ESC】to clear original name；Press【ENTER】
to save data and exit；
b) Press【2】： assign authority to matrix users for controlling this macro：
【Picture 4-5 Authority Editing Window】
√ to grant authority，× to deprive authority. When editing, firstly input user
number, then press【ENTER】to edit authority. Press【PREV】/【NEXT】to switch
and press【ENTER】to exit.
c) Edit order of commands：Press to delete the current command, with
pressing【SHIFT】, it will delete all macro commands； or is for
inserting a command before or after the current command.
d) Save macro：After the completing of macro editing, including macro name,
authority and commands, it is imperative to press for saving the macro.
Macro0001 Name：switch test series12
--------------------------------------------------
No comd para1 para2 para3
001 SWD 00021
002 DWL 00003
003 SWD 00024
0
0
0
0
4
4 DWL 00003
005 LOP
description：delay para sec and execute next
command
para：second
按键：<1>编辑名称<2>编辑权限
Mac 0001 User-Authority
--------------------------------------------------
01-√ 02-× 03-× 04-× 05-×
06-× 07-× 08-× 09-× 10-×
11-√ 12-√ 13-√ 14-√ 15-√
16-√ 17-√ 18-√ 19-√ 20-√
21-√ 22-√ 23-√ 24-√ 25-√
26-√ 27-√ 28-√ 29-√ 30-√
31-√ 32-√ 33-√ 34-√ 35-√
User：02 Authority：