User manual

15
3、 Monitor Numbers：Press 【MON】to switch cursor to MON line，input
numbers or press【PREV】/【NEXT】to switch back and forth. Following
icons are for monitor locked status and default macro enabled status. Inside
the monitor locked status icon is the user ID which locked the monitor. If the
ID is „SY‟，then monitor is locked by system, i.e. locked through macro
command execution. Users with authority to control this monitor are all able
to unlock this monitor.
4、 Cam Number：Press【CAM】to switch cursor to CAM line，input numbers
or press【PREV】/【NEXT】to switch back and forth. Following icons are for
video status, locking status and default macro enabling status. Video status
icon detects whether video input is available for the current camera, if so, a
camera icon will be shown. Inside the locking status icon is the user ID
which locked the monitor. If the ID is „SY‟，the camera is locked by system,
i.e. locked through macro command execution. Beneath camera number is
description for this camera. Matrix can overlay two lines of words for each
input, here shows the second line. Only original user or those with higher
authority can unlock the camera. High authority users can also unlock the
camera through ultra vires control.
5、 The current camera is connected to 8 contact closure：Press【AUX1】~
【AUX4】and extended function buttons F5~F8 to operate，● means OPEN，
○ means CLOSED.
6、 Joystick Status Display：Except for displaying joystick moving direction,
X/Y/Z measures the movement of joystick‟s left and right, up and down and
rotation. Range for left and right, up and down is 0~63，and rotation 0~7.
7、 Tips display area ： Operation tips, operation abnormal display area.
Operation abnormal messages will be cleared by pressing any button or to
wait 3 seconds.
8、 User ID：Current user ID.
9、 Keyboard IP：IP address for current keyboard.
10、 Keyboard locking status mark.
11、 Communication status mark: it should be radiating when the keyboard is
properly connected to matrix.
4.3 Switching Functions
Switching cameras and monitors is a major function of matrix switcher. The keyboard is support
multi-approaches to switching functions.
1、 Enter camera numbers：Firstly, to choose a monitor. Press【MON】, then input the
monitor number and press【ENTER】or press【PREV】/【NEXT】to switch monitor
numbers. Once monitor is confirmed, press【CAM】and input camera number. If the
input is invalid, hints will pop up on keyboard screen.
2、 Press 【PREV】/【NEXT】： Once monitor is confirmed, press【CAM】and then press
【PREV】/【NEXT】.
3、 Turn shuttle: The outer ring is for switching monitors, and the inner ring is for switching
cameras.