User manual

10
2、 Push number bottom to amend IP address or and to amend unit setup.
3、 On MAT keyboard supports IP address of 8 Matrix in total. When system have several
network Matrix controlled by the same keyboard, it can switch directly to the Matrix
needed control in Matrix control screen. If IP address of Matrix and keyboard of
customer wanted, keyboard display “ IP address conflict please amend” and suggest
customer to amend IP address of Matrix.
4、 On PTZ protocol including PELCO-P、PELCO-D，baud rate supports 600、1200、2400、
4800、9600、19200、38400.
5、 On DVR, protocol is PC_DVR and EM_DVR.
6、 On DEV, model is EAS and CMS that is network video management host and digital
video plat room.
3.4.5 Hardware setup
Setup the illumination of LED, touch-tone, alarm tone and prompt tone. Alarm tone is when
keyboard connect with Matrix and it alarm the keyboard will sound singing automatically, user
can close manually. Prompt tone is if operation of keyboard is abnormal it will sound singing.
【3-4 Hardware setup screen】
 Push【1】， Illumination of screen decrease, Push【3】， illumination of screen increase.
 Push【2】，Touch-tone take effect or prohibit.
 Push【5】，Alarm tone take effect or prohibit.
 Push【8】，Prompt tone take effect or prohibit.
 Push ，Save setup and exit; Push not save and exit.
3.4.6 Delay setup
【3-5 Delay setup screen】
Hardware setup
Illumination: 1====|==3
Touch-tone:[√]-2
Alarm tone:[×]-5
Prompt tone:[×]-8
Delay setup
Control screen lockup delay: 003(min)
Illumination of LED close delay: 010(min)
Light of key-press scale delay: 010(min)
Note: Delay time is 0, it can‟t lockup
automatically or close light.