Manualshelf

User manual

ManualsBrandsCCTV ManualsComputer equipmentIntelligent Network Keyboard
12345678910
9
Gateway setup according to LAN setup and the default address is 10.10.10.246.
Start port should same with Matrix and the default port is 18801.
WEB Port retains for backup and the default port is 80.
MAC default setup 00.50.C2.81.xx.xx . No need to amend normally.
When editing keyboard physical address, select suitable input method by “MODE”
and eliminate former parameter by “ESC” before editing and finish edit by pushing
“ENTER”. After save network parameter, keyboard will suggest restart.
3.4.2 User management
Keyboard supports up to 8 users including higher management, middle management,
general management, higher operator and general operator. Higher management can set all
parameter of keyboard and without the right to operate “user management”.
Each user has three state, that is normal, freeze and cancel. User under normal can load; user
under freeze can‟t load but the password and right saved; user under cancel means without using.
Higher management can edit these.
Push “PREV” and “NEXT” switch control right and user‟s state.
Note: The default user 1 is higher management and his state is normal. Password is
“000000”. The type and state of user 1 can‟t amend but can change password.
3.4.3 User‟s password management
Load user can change his load password.
3.4.4 Network equipment management
【3-3 Equipment management screen】
Keyboard switch control equipment including MAT (Matrix and Large-size screen
monitors split joint control), PTZ ( High speed dome), DVR, DEV ( Network video server
management host and digital video platform).
1、 Push and switch control equipment including MAT、PTZ、DVR and
DEV；