User manual

37 DIGITAL VIDEO RECORDER
3. RECORD
3.1. Record General
1. The menus are displayed with options on the left-hand column and settings in the
right hand column. A cursor (highlighted menu) can be moved using the Direction
buttons [ ] .
2. Change below options using [DEC/INC] buttons.
1) Schedule Use: This enables or disables Night Zone. By default “OFF”.
2) Boot up Record: It starts to recording without pressing [REC] button when it set “on”.
3) Disk Overwrite: Select the record policy of the hard disk drive.
- ON: By default, the hard disk drive will overwrite from the beginning when it
becomes full.
- OFF: It stops recording after HDD is full.
4) Record Mode: This DVR records each camera individually and then multiplexes
them. You can setup maximum recording speed for each channel as next page.
5) Auto Delete: Allows you to configure when the DVR automatically deletes all data
from HDD. It lefts the data for below duration from current time.
[NONE  12HOURS  1DAY~ 6DAYS  1WEEK ~ 4WEEKS]
6) Pre-Record: Determines the duration of the DVR stores video recorded prior to the
beginning of Event Recoding. [ 5SEC ~ 300 SEC ]. By default 5 sec.
7) Post- Record: Determines the duration of the DVR continues record after Event detect.
[5SEC ~ 300 SEC ]. By default 5 sec.
<Note>
1. Alarm/Motion Duration will be extended if there is another Alarm/motion detection
W hile Event recording.
2. When recording, the Pre-Record and Post-Record will not be activated.
3. Save changes and exit the menu, press [MENU] button.
Exit the menu without making changes, press [CANCEL] button.