User`s manual

DVR User’s Manual
46
Appendix A: Technical Specifications
All specifications are subject to change without notice.
Specifications 16CH 8CH 4CH
Video
Operation System Embedded ( Linux )
Input
BNCx16,1.0Vp-p, 75 ohm BNCx8,1.0Vp-p, 75 ohm BNCx4,1.0Vp-p, 75 ohm
Main BNCx1, 1.0Vp-p, 75 ohm
Output
Call BNCx1, 1.0Vp-p, 75 ohm --
VGA Output (Optional) 800x600, 1024x768, 1280x1024 pixels (Optional)
Picture Refresh Rate NTSC: 30PPS (per channel) / PAL: 25PPS (per channel)
Audio
Input D-SUB x 16, Line-In D-SUB x 8, Line-In RCA x 4, Line-In
Main RCA x 1, 1 Channel Line-Out
Output
Call RCA x 1, 1 Channel Line-Out --
Data Rate 8 Kb / s, per ch
Recording
Compression Method H.264
Recording Mode Schedule, Alarm, Motion Detection
Pre-alarm Yes
NTSC:
60PPS@720x480 pixels
120PPS@720x240 pixels
240PPS@360x240 pixels
NTSC:
30PPS@720x480 pixels
60PPS@720x240 pixels
120PPS@360x240 pixels
Recording Resolution &
Rate
PAL:
50PPS@720x576 pixels
100PPS@720x288 pixels
200PPS@360x288 pixels
PAL:
25PPS@720x576 pixels
50PPS@720x288 pixels
100PPS@360x288 pixels
Recording Mode 8 Levels Presets
Image Size 1K to 20K Byte/Picture
Storage Mode Linear/Circular
Data Life Time Yes (Programmable)
Storage
Built-in Storage Interface x2, SATA x1, SATA
Export x1 USB 2.0 Port, Support ThumbDrive®, External CD-RW or DVD+RW
Alarm
Alarm Input x16, D-Sub x8, D-Sub x4, D-Sub
Alarm Relay Output x1, D-Sub
Alarm Detection N.C./N.O., Programmable
Motion Detection 16 x 12 Grid Array, Sensitivity, Trigger Level Adjustable
Video Loss Detection Programmable
Communication
Network Connectivity Ethernet RJ-45 Connector, 10/100Mbps, supports DHCP
Remote Control Software Yes
Remote Operation Monitor, Playback, Recording, System Setup, Archive
RS-485 D-Sub
IR Remote Yes (Optional)
Dome Control Protocol DynaColor, Pelco P, Peclo D, AD422, Fastrax 2, Panasonic
General
Operation Temperature -5°C ~ 40°C
Relative Humidity 10% - 90% Non-condensing
Power Consumption &
Input
AC 100 ~ 240V, 50-60Hz, 60W Adaptor