User manual



Website:www.CCTVSecurityPros.com



the motion detection for each channel..
SNESITIVITY：each channel has corresponding sensitivity setting,including four standards
high,higher,medium and low, press 【Enter】key to switch
MD AREA： each channel has corresponding regional motion detecting setting,move the cursor to
corresponding 【setting】，press【Enter】to enter regional setting interface, red area means it have
activated motion detection, transparent block means it have not activated motion detection.
Move the direction key on romote control to make cursor move in the small pane, green frame
means the cursor has moved to this pane, press 【Enter】to select or cancel motion detection of this
small pane, when setup finished, press 【exit】to back to MD setup interface, it will save
automaticly.
Remark:
IR Operation: press [Menu] key to select or cancel the entire screen. Mouse operation:
click left and drag the frame to setup the region for motion detection.
2.2.2.5.4 MOBILE
Move the cursor to【MOBLE 】（Icon highlighted when selected），press【Enter 】to enter
into setting interface.