User manual



Website:www.CCTVSecurityPros.com



0 second、10 seconds, 20 seconds, 40 seconds and 60 seconds
● BUZZER：buzzer calling time setup when alarm triggered: 0 second,10 seconds,20
seconds,40 seconds and 60 seconds
● POST REC.：post recording time setup: 30 seconds,1 minute,2 minutes and 5
minutes
● PRE REC：Pre-recording time is fixed as10 seconds.
2.2.2.5.2 SYSTEM INFO
Move the cursor to【SYSTEM INFO】（Icon highlighted when selected），press【Enter】to
enter into setting interface, at this interface mainly display system hardware features and firmware
version, include : device type, software version, MAC address 、serial number.
2.2.2.5.3 MOTION DETECT
Move the cursor to【MOTION DETECT】（Icon highlighted when selected），press
【Enter】to enter into setting interface.
STATUS：Each channel has corresponding channel switch, press 【Enter】to turn on or turn off