User manual
83
13. 2Way Audio
Connect 2Way Audio
Connect 2Way Audio
[What is 2Way Audio]
Two-way (duplex) audio communication
between the Site and the Center allow you to
hear audio/voice transferred from the Site on
the Center’s speaker, as well as to transfer
your audio/voice to the Site through the
Center’s microphone.
When 2Way Audio is in use, audio
recording from the Site will discontinue. To
record audio from the Site you must stop
2Way Audio.
• Using 2Way Audio might temporally delay
image transmission for sound card
initialization, this is not a fault.
[How to start 2Way Audio]
• Click on the button to use 2Way audio communication.
The site must be connected beforehand.
• If several centers are connected to a Site, 2Way Audio
connection is created to the Center that first requested it.
[Closing 2Way audio]
• Click on the button [ X ] in the upper right hand corner of
2Way Audio box to stop 2Way Audio communication.
• Click on the button [ _ ] in the upper right hand corner of
2Way Audio box to minimize the box.
[Voice Receiver] [Voice Transmission]
•
•
1
2
3
2