User manual


64



1
[Emergency Setup]
[Motion for Emergency Message]
When selected cameras detect motion, an emergency message will be displayed automatically on
Emergency Monitor window on DN Center PC, provided Center Software is installed and running.
[Sensor for Emergency]
When selected sensors are triggered, the internal speaker on DN Center PC will beep and the
recorded video of the connected camera(s) will be transferred to the Center PC.
[Emergency Connection Phone Number and the Emergency IP Address]
If a Site is connected to the Centre PC using LAN or Leased Circuit, enter the IP addresses for
emergency image or data transmission. You can specify up to 2 IP addresses.
If a Site is connected to the Centre PC using modem, enter the telephone numbers for emergency
image or data transmission. You can specify up to 2 IP addresses.
[Transfer time(sec)]
This box shows how long the recorded data will be transferred to the Centre PC when emergency
event occurs (it may be a camera detects motion or a sensor triggers – see ). You can select
the time from the scroll list. If another emergency event occurs during the transfer, the Site will
transfer the data again.
2
3
11.6 Communication Setup
1