User manual


58
Selection of Resolution, Rec. Quality and Transfer Quality under [All] (see picture on
previous page) will apply the selected value to all cameras.
You can not change recording frame rate separately for each camera on the models with
KMC-8016D capture board installed (e.g. DN-1816, DN-1808S).

Default recording frame rate per channel for DN-3416 and DN-4416 are.
Channel Recording Frame
4 Ch. 30 frames per second
8 Ch. 15 frames per second
16 Ch. 7 frames per second
When you increase the recording frame rate of any camera, the frame rate for other
cameras may decrease automatically.
(Resolution by NTSC)