User manual
57
11.3 Recording/Display Setup
Recording/Display tab
contains recording/display
parameters such as
recording speed, display
speed, resolution and
image quality.
[Camera]
Display camera number.
[Rec. Frame]
You can change the recording frame rate of each
camera by sliding the scroll bar.
[Resolution]
You can change the image resolution of each
camera: 320x240 or 640x480 (384x288 or 768x576
PAL) are recommended.
The DVR may automatically adjust the frame rate
when selecting 640x480 (768x576 PAL). You will
be prompted to confirm the change as shown
below:
You can change the recording speed of each
camera in case of emergency.
[Rec. Quality]
You can change the quality of the recording for each
camera. The higher recording quality the more
storage space is needed.
You can change the quality of the transfer image for
use during transmission. The higher transfer quality
the more bandwidth is needed.
[Default]
Change all the settings to the default values.