User manual


52
[Sensor]
To connect a sensor to a control, type the number of
the sensor on the box corresponding to the control.
If you wish to connect multiple sensors to a control,
type the sensor numbers in the box, separating them
by comma.
Example: In order to turn on Control 3 when Sensor
1 or Sensor 2 triggers, type “1,2” in the box against
Control 3.
1
2
3
4 5
[Setup]
Check the box to use the control.
[Controller name]
Enter the controller’s name. Up to 14 characters
are allowed
[Automatic ON/OFF]
Auto function automatically activates controls during
selected time. To enable Auto function, choose the
time from scroll list. Default is set from 00:00 to
24:00.
[Working sec]
Assign how long the control will stay active once it is
triggered. Maximum is 360 seconds and default is 0
seconds.
Control Setup
Control Setup
1
2
3
4
5