User manual


51
[NC/NO]
Choose sensor type. Click the button to switch
between [NC] and [NO] sensor types.
NC = Normally Close type. If the door/object with
the sensor installed is not closed, the sensor will
trigger.
NO = Normally Open type. If the door/object with
the sensor installed is not open, the sensor will
trigger.
[Use alarm]
Selecting [Use alarm] will enable the built-in internal
speaker to beep if a sensor is triggered. The speaker
however will not beep if the corresponding camera
schedule is set to Continuous Recording (see
11.4).
[Setup]
Check the box to enable sensors. Unchecked
the box to disables sensors.
External sensor setup
External sensor setup
1 2
3
1
2
3