User manual


50
[Sensor]
You can connect sensors to available cameras. This
function enables cameras to record automatically when
the connected sensor(s) is triggered.
To connect a sensor to a camera, type the number of
the sensor in appropriate camera number. If you wish
to connect multiple sensors to a camera, type sensor
numbers in the box, separating them by comma.
Example: In order for Camera 4 to start recording when
Sensor 1 or Sensor 3 is triggered, type “1,3” in [Sensor]
box against Camera 4
[Motion]
You can link cameras to other available cameras. This
function enables linked cameras to record automatically
when the main camera detects movement.
To link a camera to another camera, type the number of
the camera you wish to connect in appropriate camera
number. If you wish to connect multiple cameras to a
camera, type camera numbers in the box, separating
them by comma.
Example: In order for Camera 5 to start recording when
Camera 1 or Camera 2 detects motion, type “1,2” in
[Motion] box against Camera 5
1
2 3 4
5
[Name]
• Type in camera names. Up to 14 characters are
allowed.
[Setup]
• The box is checked if the camera is in used.
You can’t change this setting at the Center but at the
Site.
[P/T]
Check the box if the camera is of PAN/TILT type.
11.1 Hardware setup
Camera setup
Camera setup
1
2
3
4
5
6
7
6
[Type]
Use the scroll bar to select PAN/TILT camera model
from the list.
This option box is disabled if [P/T] box is not selected
[Emergency]
The box show a preset location where Pan/Tilt camera
will return to when any linked sensor is triggered. You
can changed this settings at the Center but at the Site.
