User manual


46

   






1
2
3
4
5
6
9.2 PAN/TILT Control for Speed Dome Cameras
[Auto]
The dome camera will move automatically between
the preset positions.
Auto function will stop when you click any button (left,
right, up, or down).
[Pan]
The dome camera will move automatically within the
selected angle.
Pan function will stop when you click any button (left,
right, up, or down).
[Setup]
This is used to setup the Pan function.
In order to setup Pan function you need to click
then move the camera from left to right
and disable the “Setup” by clicking .
Pan angle starts from the point you started to the
point where you disabled the setup.
[Del]
You can delete the configured values on Auto or
Pan function.
“Auto”: Convert into and click
“Pan”: Convert into and click
while is pressed.
[P/T Speed]
Speed of manual movement of the dome camera
can be adjusted here
[PAN/TILT Control]
Click on the arrows to move the dome camera left,
right, up and down.
Speed dome camera control may vary depending on models
 [Tip]