User manual
22
6.2.1. Add a new site
To add a new site to the list click on [Add] to enter the site’s information (group, type, code, name,
phone number, and password to access) as shown on the picture below
6.2 Connecting to Site using PSTN/ISDN
A
[Group]: Select the group where the Site belongs to
[Group Add]: Add a new group.
[Site Type]: Select KSR model installed at the Site. (KSR204, 304M, 404, 509, 516)
[SITE Code]: Enter the Site’s code here. It must be the same as set at the Site.
[SITE Name]: Enter the user-friendly name for the Site.
[TEL Number]: Enter the phone number of the Site.
[Password]: Enter the same password as set at the Site.
[Confirm]: Enter the same password as in
To be able to establish Site-Center connection, and must be the same at the
Center and at the Site
B
C
D
A
[List of sites]: The list displays the registered sites, divided
into groups for easy navigation.
[Selected site info]: When a remote site is selected on [List
of sites], the site’s info is displayed.
[Site Search]: To find a site by site’s type or site’s name
Click on [Search] to start searching. The result is shown on
the left ([List of sites])
Click on [All Sites] to list all sites again on [List of sites]
[Control]
[Add] Click to add a site to [List of sites] (to register a site)
[Edit] Click to edit the site currently highlighted
[Delete] Click to delete the site currently highlighted
[Connect] Click to connect to the site currently highlighted
[Cancel] Click to close the window
A
B
C
D