User manual


134
[Tips] 2Way Audio Function will not work if,
 Your voice will not transmit to receiver if ‘microphone’ is not selected from “ Recording Control”
 2Way Audio cannot be connected from Site to center
(2Way Audio Connection is possible from center to Site)
 2Way Audio function cannot be used if center is not connected to site.
 2Way Audio connection will end if you disconnect the most active site among several sites
from center or switched to other site.
 If you end the connection for Center program then 2Way Audio function will end as well.
 You cannot use 2Way Audio function if you do not have sound card or if sound card driver is
not installed.
 If the sound card does not support Duplex Audio, you cannot use 2Way Audio. In other words,
you should be able to hear sound (Wave) when recording Micro Phone (Most recent sound card
supports Full Duplex Audio).
 If you are using recording function from other software, you cannot use 2Way Audio function
(Audio input by using microphone from sound card can only be used from one logical program at
once).
 If the sound card does not want to support to mix several sound sources simultaneously then,
2Way Audio function will not operate normally.
(For example, when using Audio program while trying for 2Way Audio connection, 2Way Audio
cannot operate normally if its sound card cannot support the function.
