User manual


122
[Tips] Line speed
• If connection gets disconnected frequently or
communication status is unstable when using PSTN,
execute “Modem” from “Properties” and select “Register
information” from “General”.
• From ‘Modem register information’ window,
 Select ‘38400’ for maximum speed if PSTN
 Select ‘115200’ for maximum speed if ISDN
• For safety of communication line, modem for center and
site should be set to equal.
(Connection may not work well if something like noise and
old line etc. are accompanied).
Click on [Server Type…] button and:
•Choose “PPP: Internet, Windows NT server,
Windows 98” on ‘Server Type’.
• Check “Enable Software Compression” and
“Require Encrypted Password” and click “Apply”
button and “OK”.
•
Make sure if there is “Monitoring” in the
“Status”
(the type of dial-up server is
different depending on the ISDN modem as
you see above
).
• Click on [Change Password] button and
enter the old password, and enter “1234”
as the new password.
