User manual


113
4.1 Connecting using Mobile/Cable Internet
1
Click on button. Then, the following Connection Setup screen will appear:
A
[List of sites]: The list displays the registered sites,
divided into groups for easy navigation.
A
[Add]
Click on the [Add] button to add (register) a site. A window as shown below appears, prompting you to
enter the site code, the site name, the IP address, the installation place, the password and the DVR
type. Then, click on the [OK] button.
2
A
B
C
D
E
F
G
A
[Group]: Select the group where the Site belong
to. If such a group doesn’t exists, you can add a
new group by clicking on [New Group]
[New Group]: Click to add a new group
B
[Code]: Enter the Site’s code here.
[Name]: Enter the user-friendly name for the Site.
[IP]: Enter the IP address of the site.
[Password]: Enter the password for access to the
Site.
[Type]: Select the Site’s type. Both the PC-type and
the standalone sites are supported.
C
D
E
F
G
!
[Warning]
• To be able to establish Site-Center connection, [Code] and [Password] must be set to the
same values as at the Site