User manual

Kodicom DN Manual

B.2. RX-Receiver (KRE-302) layout (optional)

Inside of RX-Receiver

RX-Receiver

1. COM 1 : TRANS connection site

2. COM, 24V, 110V, 220V : TRANS connection site

3. AC 220V/110V : Select AC input voltage

4. FUSE : 250V/1A (control FUSE : RX Receiver control Fuse)

5. FUSE : 250V/2A (RX Receiver voltage Fuse)

6. MAIN INPUT : main input voltage

7. LIGHT : output of AC input voltage (connect to lamp power)

8. COMMON : 220 , 110, 24V : AC output voltage (can be used commonly)

9. CONTROL : WIPER, CAMERA, AUX : connect to each connectors’ power

10. RIGHT, LEFT, DOWN, UP : connect to PAN/TILT DRIVE

11. ZOOM, COMM, FOCUS : connect to Lens

12. +, - : connect to RS-422 signal line on BOARD (IO8816)

13. PWR : Power display LED for RX Receiver

14. TXD LED : LED displaying data transmission from RX-Receiver to IO8816(RS-422)

15. RXD LED : LED displaying data transmission from IO8816(RS-422) to RX-Receiver

16. PAN/TILT ADDRESS : Assign address when using multiple RX-Receivers (assign from 00 to 99)