User manual

4
C2 2003/06/16-12:22:00-1
Kodicom DN Manual
73
Clicking button, you can start to search. A progress status is displayed while the data are
extracted. Click the Cancel button on the progress status window to stop searching. You can still view
the images up to the point where the search was stopped.
[Start Object Search]
4
After images with object changes are detected, the search results will be displayed on Object Search
window. Click on the “Text” button to change the way the search results are shown: text-only or
text-and-image.
Select one result from the Object Search Result window, and click on the Play button to start playing
back from the selected time.
[Object Search Result]
6
Click on the Text button to view
the results in text-only mode.
Click on the Image button to view
the results in text-and-image mode.
[Image Mode Display]
[Text Mode Display]
[Tips]
If the object disappears and there is no motion for more than 3 seconds after the object disappears, it will be
detected by the object search. In the same way, if the object appears and there is no motion for more than
3 seconds, it will be detected by the object search as well.
☞
5
5
6
7
7