User manual

Kodicom DN Manual

1.23 E - Map

E-Map tab contains the

settings for E-Map. E-Map is

computer map of the area

with designated locations of

installed cameras, sensors

and controls

[Check Emap]

Check the box to enable E-map.

[Position No.]

For a split screen mode you can assign on

which channel the E-Map will be displayed (scroll

list option may vary depending on DN model).

You can copy E-map settings to another channel of

another split screen mode by clicking on and

select the split screen mode and the channel

number you wish to copy to.

[User Image copy]

Click Find and select the image file to use as an E-

map, then click Go! to display the image.

The DVR will automatically copy the image to its

backup folder. The backup file will be overwritten

when another E-Map image file is selected.

The image file must be in BMP format.

[Setting]

You can mark positions of the installed cameras, controls,

and sensors on the E-Map.

To mark a device, select its type (camera, control or

sensor) and its number . Then select the device from

the scroll list on the right and click to the location of the

device on the E-Map to insert the device’s icon.

• When device type is Camera, you can choose CCD,

Pinhole, or Speed Dome cameras in .

• When device type is Control, you can choose Light or

Alarm controls in .

• When device type is Sensor, you can choose Fire, Laser,

or Heat sensors in .

[Delete camera, control, sensor]

To delete a device from the E-map, enable Delete camera,

control, sensor and click on the device’s icon on

the E-Map. To delete all icons, disable Check Emap

option .

6 7