User manual

Kodicom DN Manual

[Channel view]

Displays image from the selected camera channel.

Clicking anywhere on the channel view will move the

camera to that position.

[PAN angle]

Adjust sensitivity of camera’s horizontal

movement . If the camera moves too much or too

less when tracking movement, adjust PAN angle

accordingly.

[TILT angle]

Adjust sensitivity of camera’s vertical movement. If

the camera moves too much or too less when

tracking movement, adjust TILT angle accordingly.

[Sensitivity]

Adjust camera motion tracking sensitivity. If the

camera reacts too much to small movements, or

does not react even when there is large movement,

adjust camera sensitivity accordingly.

[Camera flip]

If the camera is attached upside down (e.g. attached on

ground surface), enabling Camera flip will flip the

camera’s image vertically.

• When there are multiple moving objects, the

camera will track the most active object.

• When motion tracking is enabled on a camera,

the corresponding channel will display

“PAN/TILT” and “Motion tracking” on the top left

corner.

• The DVR will ignore motion tracking setting

when controlling the camera manually (manual

control must be enabled – see page 64).

• For optimal performance, decrease the

camera’s motion tracking sensitivity in dark

places and increase the sensitivity in bright

places.