User manual

Kodicom DN Manual

1.11.2 Hardware setup - Sensors

[Setup]

Check the box to enable sensors. Unchecked

the box to disables sensors.

[NC/NO]

Choose sensor type. Click the button to switch

between [NC] and [NO] sensor types.

• NC = Normally Close type. If the door/object with

the sensor installed is not closed, the sensor will

trigger.

• NO = Normally Open type. If the door/object with

the sensor installed is not open, the sensor will trigger.

[Use alarm]

Selecting [Use alarm] will enable the built-in internal

speaker to beep if a sensor is triggered. The speaker

however will not beep if the corresponding camera

schedule is set to Continuous Recording (see page

26).

[Recording Time]

Select the number of seconds to record when a

sensor is triggered. This function will not work if the

recording schedule is not set to Sensor or Motion

(see page 26).