System information

Manual64
© 2007 Digital Video Witness
Search Mode
4.8
[Print]
Left click on the Print button to print the currently selected still image.
(Stop playback and select an image by left clicking on it.)
The printed image size is determined by the image size on the screen. Use the ‘Enlarge Image’ tool to set the image
size.
The printed image will show the image, the site code of the DVR (p.33), the date and time the image was taken, the
camera number, and the watermark status.
[Data Backup]
To save a backup of recorded data.
[Bookmark]
The Bookmark function allows you to index certain events or images
for quick access through a list instead of having to choose a date, time
and camera for search.
When you find an image or event to Bookmark, select the
image by left clicking on it.
The image will move to the center of the view screen. Click on the
Bookmark button to bring up the Bookmark list. Click on ‘Add’ to
enter the image information into the list.
Click on an entry on the list to select it and click ‘Delete’
to remove it from the list.
Click to delete all entries on the list
Select an entry in the list and click ‘Goto’ to
show that image on the view screen.
[Audio Setup]
You
must enable audio save and playback in ‘Audio Setup’ (p.42) to use this function. Select the
camera associated to the audio by clicking on the image and setting it to center screen. Click on the ‘
Audio’ button to show the volume slider.
> Place a check in the ‘Enable’ box and adjust the volume with the slider until audio is at a
comfortable level. Click on ‘OK’ to save your setting.
You must have a microphone and speakers attached to the DVR to use the audio
function. See page 77 for instructions on setting up the DVR for audio
recording.
[Recording]
Click
on the button to stop recording live images while you are in Search Mode. If the DVR is set to record at
high quality and larger screen sizes in ‘Motion Setup’ you may notice Search functions will slow down slightly.
This is norm due to the large amount of data being written to the storage drive.
When the live recording is disabled the button will have a red ‘X’ over it.
Use this function if you experience errors while recording backup data to a CD-R/CD-RW. (Especially when
recording AVI backups.)