System information

Main 61

Search Mode Still Image Tools

4.5

[Brightness]

Lighten or darken the image.

[Sharpness]

Sharpen or remove blur from the image.

[Deskew]

Straighten the image if the pictures appears tilted

left or right.

[Rotate]

Rotate the image 90 degrees at a time.

Stop Playback and

select a single

image to use Still

Image Tools

[Contrast]

Increase or decrease the amount of difference between light and dark areas.

[Noise Reduction]

Reduce the speckling that can occur when you zoom in, increase contrast, or sharpness of the image.

[Gamma Correction]

Adjust the color saturation of the image. If some colors are too bright or distorted, you can reduce the color

without changing it.

[Undo]

Undo all changes and return to the original image

4CH

6Ch

9CH

10CH

13CH

16CH

Drop menu

Click on the up arrow to show the screen division selector.

Click on the screen division to apply it to the Search screen.

In ‘Panorama’ mode this will determine the number of sequential frames

to be shown on a camera.

In standard ‘Search’ mode, you can search up to 16 cameras

simultaneously.

NOTE: When searching multiple cameras at once, some camera images may be blank or show a still

image at times. This is normal. This means there is no recorded data for those cameras at that minute

of playback. (Cameras only record when there is motion) The still image is the last image recorded by

a camera. During playback, the last image shown will remain in the frame until a new image replaces

it.