System information
Manual60
© 2007 Digital Video Witness
Entering into Search Mode
4.4
Search Mode allows you to
quickly and easily access
recorded data. If you capture
an event that you need to
copy or backup, you can
transfer your video to a
variety of removable media
devices including floppy
disks, CD-R, CD-RW disks,
External hard drives, and
network storage devices.
The transferred images may
be ‘Watermarked’ to prevent
tampering and allow
admissibility as evidence in
the court system.
[Calendar]
To use Search Mode click on the Calendar button to
show the calendar.
Use the Arrows to select the month, then click on the
day you wish to search to select it. Days which have
recorded data will show up in bold type.
[Timeline]
Shows the entire selected day in 1 hour increments.
Time is shown in 24-Hour format beginning with
hour 00 (Midnight ~ 12:59am) and ending with hour
23 (11:00pm ~ 11:59pm)
You may left click on the timeline to expand
(magnify) the recorded data area. This can help you
find a specific time more easily. You may expand the
data area 2 times. Click again and the timeline will
return to normal size.
[Show/Hide Camera][Select Camera]
Click on the up arrow to show recorded data and
camera buttons.
Click on the down arrow to hide recorded data and
camera buttons.
(The button changes according to the panel status.
Click on the buttons to select the cameras you want to
search. Select up to 16 cameras to search at the same
time.
[Recorded Data]
The horizontal lines show when data was recorded. The
lines may be different colors depending on what type of
recording was used, or what triggered the recording.
Each camera has a recording bar, showing when and how
the camera has recorded.
>
Pink bar indicates Continuous Recording.
>
Blue bar indicates Motion Recording.
>
Red bar indicates Sensor Recording.
>
Green bar indicates Pre Alarm Recording.
>
No bar indicates that nothing was recorded.
[Search Time Indicator]
A thin vertical bar will indicate the current time being
searched. Left click in the data area to move the bar to a
different hour or minute.
[Hour Minute]
The hour and minute values show the current time being
searched. Left click on the up and down arrows to change
the values. The values will also change when you click in
the data area to move the Search Time Indicator.