System information

Manual54
© 2007 Digital Video Witness
[Check Emap]
Place a check in the box to enable the
EMAP function. The EMAP will allow
you to place a bitmap image (*.bmp)
into a frame on the main view screen.
(One camera will be replaced by the
image.) You can place icons on the
image to represent the positions of your
cameras, sensors and controls. The icons
will flash to indicate the associated
device has been activated. Clicking on a
camera icon will open that camera to full
screen view.
[Position No.]
For a split mode you can assign which
channel the E-map will be displayed
(scroll list option may vary depending on
DN model).
> You can copy E-map settings to
another channel of another split screen
mode by clicking on and select the
split screen mode and the channel
number you wish to copy to.
>
[User Image Copy.]
Click Find and select the image file to
use as an E-map, then click Go! to
display the image.
> The DVR will automatically copy the
image to its backup folder. The
backup file will be overwritten when
another E-Map image file is selected.
> The image file must be in BMP
format.
[Settings]
You can mark positions of the installed
cameras, controls, and sensors on the Emap.
To mark a device, select its type (5) (camera
control or sensor) and its number. (6) Then
select the device from the scroll list on the right
and click the location of the device on the
E-map to insert the devices icon.
> When Device type is Camera, you can choose
CCD, pinholde or Speed Dome cameras in
(7).
> When device type is Control, you can choose
Light or Alarm controls in (7)
> When device type is Sensor, you can choose
Fire, Laser, or Heat sensors in (7)
[Delete Camera, control, sensor
> To delete a device from the E-map, enable
Delete camera, control, sensor, and click on
the device's icon on the E-Map. To delete all
icons, disable Checkup Emap option.