System information

Manual50
© 2007 Digital Video Witness
Motion tracking tab contains the
settings for cameras to track moving
objects (motion tracking).
[On/Off time]
Set the range of time for the motion tracking
function to be active.
Place a check in the [all] box to set the same
active time range for all motion tracking
cameras.
Leave the box unchecked to set a different time
range for each camera.
[Start/End Times]
Use the drop down arrows to set the start and
end times for the motion tracking function to be
enabled. (Use 24-hour time format) Enter the
start time in the upper boxes and the end time
in the lower boxes. Default is 00:00 to 24:00.
(Midnight to midnight)
[Disable PTZ mode]
Place a check in the box to disable manual
Pan/Tilt/Zoom control on the selected camera.
Manual operation of a Motion Tracking camera
through the P/T/Z controls will interfere with
the Motion Tracking function. The camera will
not return to its configured Start position if you
manually Zoom/Focus it with the P/T/Z
controls.
[Range] [Pan]
Assign how wide the camera can move
horizontally from it's starting position. The
minimum value of left and right is 40
degrees and the sum of left and right value
cannot exceed 360 degrees. If the sum value
exceeds 360 degrees the system will adjust
the angle automatically.
[Screen Value]
Click on the Screen Value button to set the
Pan angle to the current camera position.
[Enable]
Place a check in the box to enable the Pan
Range function for the selected camera.
[Range] [Tilt]
Use the drop down arrow to set the minimum
tilt of the selected camera, or use the ‘Screen
value’ button to set value to current camera
position.
Place a check in the enable box to enable
minimum tilt function.