System information

Main 49
© 2007 Digital Video Witness
Motion Tracking
3.22
[Enable Camera]
Click on the camera buttons to enable
motion tracking function.
You must select the appropriate camera in
the ‘Hardware Setup’ section (p. 13)
before these buttons will appear.
[Current Camera]
Use the drop down arrow to select the
camera you want to set up. The selected
camera’s live image will appear in the
area on the left.
[Screen Value]
Click to set the value to the position
showing in the camera image.
[Move Camera]
Click to move camera to values entered
in the ‘Pan’ and ‘Tilt’ boxes under ‘Start
Position’.
[Start Position Pan /Tilt Values]
Use drop down arrows to set start
position of motion tracking camera.
Camera will return to this position when
motion is no longer detected and
followed.
[Return Start Position]
Use the drop down arrow to select how
long the camera will remain in its last
position after motion is no longer
detected and followed.