System information

Manual44
© 2007 Digital Video Witness
[VGA Card]
You can obtain high quality backup image if
you use VIP function. Select the option to use
VIP.
Default is "VIP unused".
VIP function can work with KMC-8416 capture
card.
[Control Card Port]
Select the Com port for Control card.
Correct port is selected from the manufacturer.
[PTZ Port]
Set the COM port for Pan/TILT.
When controlling PAN?TILT from the control
card, set COM Port identical to [Control Card
Port].
If the PAN/TILIT camera uses RS-232’3 signal
from COM Port but separate then control it with
[Control Card Port] to the corresponding
PAN/TILT.
[KWD-102 Port]
Set the COM port for KWD-102.
When any program error occurs it will operate
for 10 minutes. If the error is not corrected
within 10 minutes, this will operate every 60
minutes thereon.
This is applied only in the case of video loss.
Set the COM port for KWD 102.
[Video Format]
Select NTSC or PAL according to the video
method used in your region.