System information

Manual42
© 2007 Digital Video Witness
System Setup
3.17
System setup tab
contains additional
hardware settings,
backup schedule,
watermark settings
and system-off
settings.
[System off time]
Place a check in the box next to the day(s) you want the DVR to turn itself off. Set the off time in
the Hour and Minute boxes. (Use the 24 Hour time format.)
Be aware that this is a complete shutdown, NOT a restart time. Your DVR will remain OFF
until you use the ‘Power” button on the front of the DVR to turn it on again.
[System restart time]
Place a check in the box to enable the DVR to ‘reboot’ itself at the specified time every day.
Enter the restart time in the ‘Hour’ and ‘Minute’ boxes. (Use the 24 Hour time format.)
The default restart time is 3:00 am
Example: To have the DVR reboot at 11:00pm, enter 23 ~ 00
[Use watermark]
Place a check in the box to enable the DVR to use an embedded watermark when you record an
image. The watermark is a digitally encoded algorithm placed into the image file to verify the
integrity of the image.
If the image is altered in any way, the watermark verification will fail.
A watermarked image is usable as evidence in a court of law because it can not be tampered with.
[Display watermark protect image]
Place a check in the box to display the word ‘Watermarked’ on the protected image.
Refer to the ‘Still Image Backup’ section of ‘Search Mode’ later in this manual for more
information on the ‘Watermark’ function.