System information

Manual34

Site Information

3.13

Site information tab

contains system-related

information such as Site

code, Site name, Software

version,… You can also

adjust Surveillance mode

options here.

[Site Information]

This is the Site Code you will need to enter in the Connection setup box on the remote or ‘Center’

computer when you connect to the DVR by modem or LAN.

You may rename the Site Code to any 7 digit alphanumeric name. (7 characters, using letters, numbers, or

combination of each)

If you have more than one DVR you will wish to monitor remotely, you must use a different Site Code for

each.

(Example): DVR # 1= 100-001 DVR # 2= 100-002 DVR #3= 100-003

or DVR # 1=saysc01 DVR # 2= store-2 DVR # 3= dvrmain

[Location/Model/Distributor/Sales Date/Other/Notes]

These are optional information entries.

You may fill in these boxes with information relating to your DVR for easy reference.

These entries will be viewable from the remote or ‘Center’ computer when you connect and enter the setup

mode.

When logging into the Site from the Center PC, the system checks the validity of site code and the

correct password. If either is incorrect. The system will automatically disconnect.