System information

Main 31
© 2007 Digital Video Witness
Network Setup
3.12
Modem setup tab
contains the settings
for communication of
the DVR.
In the description
below,
“ the Site ” is referring
to the DVR itself, and
the Center PC is
referring to the PC
connected to the DVR.
[Type of Connection]
Click “LAN/PSTN/ISDN/LEASED
CIRCUIT/ROUTER” if you have the DVR
installed on a LAN (Local Area Network) or if
you use the optional 56K modem to provide
remote access to a computer with the “DVR
Center” software installed.
If the DVR is installed on a LAN with a router or
gateway you may have to ‘Port Forward’
the incoming signal from the remote ‘Center’
computer. Some DSL and Cable modems also
require ‘Port Forwarding’. Consult your modem
manual or network administrator for help on ‘
Port Forwarding’.
If your connection requires port forwarding, the
default ports for the DVR are Ports 8080 through
8089. Enable the ports for TCP protocol.
To disable remote connection, check the option
box [No connection].
[Live Video Stream Bandwidth]
Limit the amount of Data transmitted from the
DVR to remote (Center) computers.
[Max Acceptable]
Set the maximum number of sites that can be
connected to the Center. One Center PC can
connect up to 120 different sites.
[Network Connections]
This buttons brings up the Network Properties
Window and can be used to change your IP
address.