System information

Manual28
© 2007 Digital Video Witness
[Camera]
Select the camera you wish to setup. All the
descriptions below are related to the selected
camera.
[Setting Recording Mode]
The table displays recording mode for every
hour. To change Record Mode, click on the
hour you wish to change (you can drag the
mouse to select multiple boxes. The selected
time will be highlighted in blue. Then
change the mode from Record Mode (4)
setting.
To be exact to minutes click on the time you
wish to change and a horizontal bar will
appear.
[Simple/Advanced Mode]
In “Simple” mode, all days (Weekdays, Saturdays,
and Sunday/Holidays) are set on a single 24 hour
timeline. Any time adjustments you make will apply
to all days.
In “Advanced” mode, Weekdays, Saturdays, and
Sunday/Holidays each have their own 24 hour
timeline.
[Copy To]
To copy the camera's schedule to other
cameras, click Copy To and select the
camera number you wish to copy to.
[Record Mode]
Select Record Mode for selected time interval. If
no mode is selected, the system will not record.
Default is
Motion & Sensor Record
for 24
hours for all date of the year
Recording
mode
• C: Continuous Rec.
• M: Motion Rec.
• S: Sensor Rec.
• P: Pre-Alarm Rec.
Supported Recording
Mode/combinations
• No rec.
• Continuous rec.
• Motion rec.
• Sensor rec.
• Pre Alarm Rec.
• Sensor & Pre Alarm rec
• Motion & Pre Alarm rec
• Motion & Sensor rec
• Motion & Sensor & Pre
Alarm rec.
Motion Recording, Sensor recording, and Pre-
Alarm Recording cannot be enabled in
conjunction with Continuous recording.
[Set Holiday]
You can set any specific days as holiday.