System information

Main 27

Schedule Setup

3.9

> Schedule setup allows you to determine what mode your cameras will operate in at any given time of day.

· Continuous: Cameras will record continuously.

· Motion: Cameras will record only when motion is detected.

· Sensor: Cameras will record when triggered by associated sensors.

· Prealarm: Cameras will record events up to 5seconds before motion is detected.

Place a checkmark in the box to enable the mode(s)

Removing the checkmark from all four options will set the camera to “Look Only” mode. (No video will be recorded)

You may use more than one mode on each camera.

> Supported modes include:

· Look Only (No record)

· Continuous Record (Disables Motion, Sensor, and Prealarm functions)

· Motion

· Sensor

· Motion + Sensor

· Motion + Prealarm

· Sensor + Prealarm

· Motion + Sensor + Prealarm