System information

Manual20
© 2007 Digital Video Witness
Hardware Setup (controls)
3.5
[Setup]
Check the box to use the controls.
[Name]
Type in control names. Up to 14 characters are
allowed.
[Auto On/Off]
Auto function automatically activates controls
during selected time. To enable Auto function
choose the time from scroll list. Default is set
from 00:00 to 24:00.
[Sensor]
To connect a sensor to a control, type
the number of the sensor on the
appropriate control number.
If you wish to connect multiple sensors to
a control, type the sensor numbers in the
box, separating them by commas.
Example: In order to tun on Control 3
when Sensor 1 or Sensor 2 triggers, type
"1,2" in the box against Control 3.
[Working sec]
Assign how long the control will stay
active once it is triggered. Maximum is
255 seconds and default is 0 seconds