System information

Main 19
© 2007 Digital Video Witness
Hardware Setup (sensors)
3.4
[Setup]
Check the box to enable sensors. Uncheck the
box to disable sensors. Sensor inputs are
standard on Rack Mount units and optional on
Desktop units. If your unit does not have
sensor inputs then do not use this function.
[NC/NO]
Choose a sensor type. Click the button
to switch between [NC] and [NO]
sensor types.
·
NC
= Normally Close type. If the
door/object with the sensor installed
is not closed, the sensor will trigger.
·
NO
= Normally Open type. If the
door object with the sensor installed
is not open the sensor will trigger.
[Camera Preset]
Enter the desired camera in the text field. Set
the preset for the camera to allow the specified
camera to Pan/Tilt/Zoom to a location when a
sensor has been triggered.
[Use alarm]
Selecting [Use alarm] will enable the built
in internal speaker to beep if a sensor is
triggered. The speaker however will not
beep if the corresponding camera schedule
is set to Continuous Recording.
[Recording Time]
Select the number of seconds to record
when a sensor is triggered. This function
will not work if the recording schedule is
not set to Sensor or Motion