System information

Manual18
© 2007 Digital Video Witness
Hardware Setup (cameras)
3.3
Hardware setup allows
users to modify external
devices configurations,
such as cameras, sensors,
and controls.
[Setup]
Check the box to use the camera.
[Name]
Type in the camera names. Up to 14 characters
are allowed.
[Sensor]
You can connect sensors to available cameras.
This functions enables cameras to record
automatically when the connected sensor (s) is
triggered.
To connect a sensor to a camera, type the number
of the sensor in appropriate camera number. If
you wish to connect to multiple sensors to a
camera, type sensor numbers in the box,
separating them by comma.
Example, in order for Camera 3 to start recording
when Sensor 1 or Sensor 3 is triggered, type “1, 3
” in [sensor] box against Camera 4.
[P/T]
Check the box if the camera is on PAN/Tilt type.
[Type]
Use the scroll bar to select PAN/TILT camera
model from the list. This option box is disabled
if [P/T] box is not selected.
[Motion]
You can link cameras to other available
cameras. This function enables linked
cameras to record automatically when the
main camera detects movement.
To link a camera to another camera, type
the number of the camera you wish to
connect in appropriate camera number. If
you wish to connect multiple cameras to a
camera, type camera numbers in the box,
separating them by comma.
Example: In order for Camera 5 to start
recording when Camera 1 or Camera 2
detects motion, type 1,2 in [Motion] box
against Camera 5
[Emergency]
Select a preset location where the Pan/Tilt
camera will return to when any linked
sensor is triggered.