System information

Main 17

Power Button

Left click on the power button in Display

mode to turn off the DVR.

Unit will stop recording and turn itself off.

Use the Power switch (on the front of the

DVR) to restart the unit.

Camera, Sensor, and Control

Relay Event Indicators

Each numbered button corresponds to the

similarly numbered device in each category.

Camera indicators will flash when a camera

detects motion. Sensor indicators will flash

when a device (Glass break or motion

detector) is tripped.

Control indicators will flash when a relay

(Alarm, siren, strobe, etc.) has been

activated. Control relays may also be

manually activated by left clicking on the

indicator. Click on it again to deactivate.

Screen Division Selections

Select the number of cameras you wish to view on the main screen.

Choose 4, 6, 9, 10, 13, or 16 camera splits

The cameras that will appear in each view are assignable in setup

under “Screen Division”

Left click on any image to bring it to full screen view. Left click on

image again to bring it to normal view.

Logout Button

This button logs out the current user.