System information

Manual16
© 2007 Digital Video Witness
Main Screen
3.2
Main View Screen
This is where the live images from your cameras
will appear.
Left click on any image to bring it to full screen
view. Left click on the image again to return to
normal view.
Clock
Indicates current date and time
Mode Indicator
Mode indicator will indicate whether you are in
Display, Search, or Pan/Tilt.
Display, Search, or Pan /Tilt mode.
Full Screen View
This button will set the main screen to “Camera only”
view. The GUI (Graphic User Interface) which
includes the Screen Division buttons, the Event
Indicators, the Clock, Setup and Search buttons,
Power button, etc. will be hidden.
Right click on the screen to return to normal view.
Right click to return.
Loop
Sets main view to 4 camera split and rotates view
continuously through all active cameras starting with
1~4, then 5~8, then 9~12, then 13~16, then back to
1~4, etc.
Click on an image, or select a Screen division button
to stop rotation and return to normal mode.
Setup and Search Modes
Left click to enter Setup (Camera selection, Screen
division, Schedule, Audio, Motion, etc.) or Search
Mode. (Review and backup recorded data)
Storage Indicator
Top line shows total Hard Drive space allocated and
available for data storage.
Numbers in the blue box show Hard Drive space that
has been used for data storage in Megabytes and
Percentage of free space remaining. When
percentage of free space reaches 0%, the DVR has
used all available storage and will begin to overwrite
(replace) the oldest recorded data.
(It is normal for the ‘Free Space’ indicator to read ‘
0% Free’ once the DVR has started overwriting the
oldest data. This number will not change unless you
reallocate (erase) the storage drive.)