Product guide

PSM-012P
4" Mono Portable Monitor
VD4.8P
Distribution Amplifier
VIDEO GROUND LOOP ISOLATOR & DVR BALUNS
LensesCamerasHardware
Control
Room
IP Media &
Transmission
Radar
Detection
ANPRAccessories
89
G 4" B&W (PSM 012P) flat screen
G 12-hour battery charge time
G High resolution display
G Sturdy carry case (PSM 012P)
G Programmable video distributor
G 4 inputs, 8 outputs
G Simple configuration
G Easy to install
The Video ground loop isolator and DVR Baluns are passive devices which
reduce ground loop interference with CCTV signals and can easily be installed
in a new system or added to an existing one. They are useful where a video
signal is transmitted via cable between points with different ground potentials.
Differences in ground potentials are typically caused by unbalanced power line
loads.
When the video sync signals are not balanced, interference can sometimes
distort and introduce noise into the video sync pulse. This can result in
weak/distorted signals being input to the DVR and the DVR Balun can help to
overcome this.
PSM012 4" B&W Portable Service Monitor with Battery pack/Charger/Case
PSM012-BP Spare Battery Pack for PSM012
PSM012-CH Spare Battery Charger
PSM012-MC Monitor and Leather Case Only
PSM012-M Monitor Only
PSM012-LC Leather-look Case Only
Ordering Codes:
VD4.8P Video Distribution Amp
Ordering Codes:
270(W) x 40(H) x 180(D) mm
65(W) x 65(H) x 57(D) mm
C-GLI High Performance Video Ground Loop Isolator
C-DVRB DVR Balun
Ordering Codes:
System
Accessories