Product guide

FILTER SET-UP KIT

VM300

Viewfinder

The Viewfinder is commonly used to determine which focal length of lens

should be used to give the correct angle of view in a particular situation. It does

this by altering the scene through the eye-piece and relating it to a particular

format focal length, which can be easily read off the scales on the barrel. The

scales relate to

" and 1". Simple to use, it helps to eliminate

problems by matching the field of view to the size of lens required.

A filter kit is essential during the installation and initial set-up of any CCTV

system where it is necessary to ensure that the equipment is adjusted to the

optimum settings for the varying light conditions to which the camera will be

subjected. By using certain optical filters mounted on the front of the lens, it is

possible to assist the set-up procedure by simulating different operating

conditions. For example, IR pass and ND3 for IR set-up on black and white

cameras.

Lenses Cameras Hardware

Control

Room

IP Media &

Transmission

Radar

Detection

ANPR Accessories

FSK Filter Set-up Kit - includes Polarising, ND1, ND3, IR cut, IR pass

Ordering Codes:

VM300 Viewfinder

Ordering Codes:

LENS ACCESSORIES

VM 100 Extension Tube Kit

VM 400 C/CS Mount Converter

DL00 Dummy lens

EX1.5C C-Mount 1.5x Extender

EX2C C-Mount 2x Extender

EX1.5CS CS-Mount 1.5x Extender

EX2CS CS-Mount 2x Extender

System

Accessories