Product guide

Model OUTREACH.NET OUTSCOURCE.NET
Ethernet 2x RJ45 ports 100baseT full duplex 2x RJ45 ports 100baseT full duplex
Input Voltage Not required 100-240V AC, 47-63Hz
Power Consumption 2.2W max, (1W typical) 2.2W max, (1W typical)
PoE: in IEEE 802.3af Class 0 (max 12.95W)
IEEE 802.3af Class 1 or 2 (max 6.49W)
: out IEEE 802.3af Class 3 (max 12.95 W) using OUTSOURCE
Distance
PoE device class 3 2 1 No POE
Device power up to: 12.95W 6.49W 3.84W n/a
Range with POE switch: n/a 300m 400m 700m
Range with OUTSOURCE: 300m 500m 700m 1000m Note: These distances are typical results when used with 24AWG Cat 5,
Cat 5e or Cat 6 cable
Dimensions 100mm(L) x 37mm(W) x 22mm(H) 140mm(L) x 65mm(W) x 36mm(H)
REACH, OUTREACH & OUTSCOURCE
Ethernet & PoE Distance Extender
LensesCamerasHardware
Control
Room
IP Media &
Transmission
Radar
Detection
ANPRAccessories
81
G Extends Ethernet cable installations to beyond
100 metres
G Forwards power over Ethernet (PoE) to remote devices
G No power cable installation required
G Fully transparent – no restriction to network traffic
G Simple to install – works instantly
G Robust, compact and wall-mountable
G Supports all network devices
OutReach.net is a LAN extender and will extend traditional network cables
from the 100 m maximum distance. The unit acts as a repeater and will extend
cable distance by 100 m with each unit connected to a maximum of 1000 m.
OutReach.net requires no separate power source as it takes the required power
from the network directly. It is ideal for IP cameras or codecs installed remotely.
The units can also forward PoE along the extended distance (depending on
power requirements).
OutScource.net is an in-line device that will insert PoE on to an existing system.
It is thus ideal for PoE IP cameras and other PoE IP products.
OutScource.net upgrades a standard switch Ethernet output to PoE.
Perfect Partners
CN-VOR OutReach.net LAN extender
CN-VOS OutScource.net PoE injector
Ordering Codes:
ZN-T9000
Page 75
ZN-D2024
Page 70
IP Media &
Transmission