Product guide

Hardware
LensesCamerasHardware
Control
Room
IP Media &
Transmission
Radar
Detection
ANPRAccessories
53
IR & WL ACCESSORIES
Brackets & Mounts
STANDARD BRACKETRY (SUPPLIED)
Illuminators are supplied with a varifocal bracket to allow alteration of the beam
angle, and a small circular U bracket which allows for up/down and left/right
adjustment when fitted to a flat surface. The IR50 and WL50 are provided with
a U bracket only.
Standard Bracket
WALL MOUNT
For mounting to a wall, the WB1 wall bracket can be used. The WB1 is a small
L shaped bracket which provides up/down and left/right adjustment when used
with the standard bracketry on Ganz illuminators.
WB1
PTZ MOUNT
The best solution for mounting with PTZ cameras is a flat sandwich bracket that
fits between the camera housing and the PTZ motor. This bracket can have
either one protruding arm for single unit installations (SB1), or two protruding
arms for twin unit installations (DB2).
DB2SB1
DOME MOUNT
CBC provide the PB-180 and PB-360 brackets for mounting with dome cameras.
These brackets are 180° or 360° circular sandwich plates that fit between the
top of a pole and the dome camera. The PB-180 and PB-360 have 2
" PCD and
4
" PCD mounting connections.
PB-360PB-180
POLE CLAMP MOUNT
For installations requiring the IR or WL range of LED lights to be clamped to a
pole, CBC can supply the PBC-1 bracket. This comes with Jubilee clips for
clamping to poles with a diameter of between 45mm and 170mm and has
mounting holes that perfectly match the various standard, supplied bracketry of
the entire IR and WL range.
PBC-1
WB1 Wall Bracket
SB1 PTZ Bracket, Single Unit Application
DB2 PTZ Bracket, Twin Unit Application
PB-180 Dome Mount Bracket - 180˚
PB-360 Dome Mount Bracket - 360˚
PBC-1 Pole Clamp Bracket
Ordering Codes: